Diana Royal marble ledger panels
Diana Royal is a Turkish marble with a warm cream to beige ground and fine veining. We make it as a 6 × 24 inch split face ledger panel with a matching 9 × 18 XL corner, and as a 9 × 24 XL wall panel in sandblasted 2D and in honed and sandblasted 3D, made in Denizli, Turkey, and sold by the container to importers, distributors and stone yards.
Ask for a quoteDiana Royal panels
Every Diana Royal panel we make, split face, honed and sandblasted. Open one for photographs of the panel and the stone up close.
Sizes and coverage
A 6 × 24 inch panel covers one square foot and a 9 × 24 XL panel one and a half, so a wall is quoted by its area alone. The 9 × 18 XL corner turns external corners and returns.
What Diana Royal marble is
Diana Royal is a cream-beige marble from Turkey. Its ground runs from warm cream to beige, crossed by fine veining, and on a split face the crystal of the marble catches the light along every break. It is warmer than a white or grey marble and crisper than travertine, so it suits rooms that want warmth without travertine's open texture.
Like any natural stone it varies from block to block, which is why samples go out before an order is confirmed.
Split face, honed or sandblasted
The 6 × 24 panel and the 9 × 18 XL corner are split face: each strip is the stone's own break, rough and in relief. The 9 × 24 inch XL panel comes in three smoother faces. 2D XLP Sandblasted has a textured matt face, with its strips on one plane. 3D Honed is ground smooth and matt, with strips that step in and out so the wall carries shadow. 3D Sandblasted puts the same relief under the softer texture of a sandblasted face.
Where it is used
Fireplaces and chimney breasts, feature and TV walls, hotel and office lobbies, reception desks, bathrooms and facades. The honed and sandblasted 3D panels suit interiors where a split face would be too rough to the touch, such as corridors, bathrooms and lobbies. Seal with a penetrating sealer once the adhesive has cured, especially in bathrooms, around fireplaces and outdoors.
Diana Royal with travertine
Diana Royal's cream ground sits close to Classic Light and Gold travertine, so the two can share a project: marble on the feature wall and travertine around it, or the honed XL panel beside a split face travertine. Against Silver travertine it reads as a contrast rather than a match. Ask for samples of both and look at them side by side in the same light before choosing.
Buying Diana Royal from us
We sell to importers, distributors and stone yards. Samples go out before an order is confirmed, the minimum order is 100 m², and one container can carry Diana Royal alongside other marbles, travertines and products. Crates are strapped timber, heat-treated to ISPM 15, and we ship FOB Izmir about four weeks after order confirmation. An XL crate holds 108 panels, 15.06 m², and a 20 ft container takes 26 XL crates, 391.56 m².
Questions about Diana Royal marble
What colour is Diana Royal marble?
A warm cream to beige, with fine veining. Like any natural stone it varies from block to block, which is why we send samples before an order is confirmed.
What is the difference between the 2D and 3D Diana Royal panels?
In 2D the strips sit on one plane and the wall reads flat; in 3D they step in and out, so the wall carries relief and shadow. Both are 9 × 24 inch XL panels, about 3–4 cm thick; the 6 × 24 split face panel is about 2–3 cm.
Can Diana Royal be used outdoors?
Yes, on facades, garden walls and outdoor kitchens. Use an exterior-rated adhesive, seal the stone, and on facades above ground level follow your local building code.
Can I order Diana Royal with other colours in one container?
Yes. One container can carry several colours and products, marble and travertine together. The minimum order is 100 m², and we ship FOB Izmir about four weeks after order confirmation.